The latest HASCO-News:

  • 27/01/2012
    New investment in HASCO’s pilot plant

    HASCO’s pilot plant provides optimum conditions for developing individual applications, sampling and testing in close contact with the customer.
  • 21/12/2011
    Participants at the 54th meeting of GKV/TecPart at HASCO.

    The members of GKV/TecPart, (Federation of engineering plastics products), headquartered in Frankfurt, meet regularly to highlight current topics concerned with mouldmaking and tooling design, to discuss them and to draw up effective solutions for day-to-day work in the field of mouldmaking.
  • 15/10/2011
    New HASCO inclined sliding carriage Z18110/…

    HASCO launches the market's smallest mechanical inclined sliding carriage

     

    With its inclined sliding carriage Z18110/…, HASCO has recently launched the smallest mechanical, positively controlled inclined sliding carriage onto the market. Because of its small size, the Z18110/… opens up new possibilities in mould design. Access to awkward undercuts in the article is made possible by its compact design.

  • 15/10/2011
    HASCO Z3150/... Needle valve nozzle

    Multi-cavity needle valve applications for the closure cap and packaging market

     

    The new range of HASCO Z3150/ ... Valve Gate Shot hot runner nozzles are a further development of the needle valve nozzle focused on demanding applications in the closure cap and packaging industry. When designing the new nozzle range, particular attention was given to the specific needs of processors in this industry.
  • 15/10/2011
    New additions to HASCO's range of ejectors and guide elements

    Ejectors and guide pillars now with DLC coating

     

    With three new products, HASCO has responded to the mounting demands on the wear resistance and service life of components in injection moulding machines. This has been accomplished by applying a DLC coating to improve the slip properties and reduce susceptibility to wear of standard elements for guiding and ejection.

  • 15/10/2011
    New HASCO needle valve range Z107900/…

    The new needle valve range Z107900/… combines many years of HASCO experience in the field of needle valve technology with the latest sealing developments and a rugged adjusting mechanism.

  • 15/10/2011
    New HASCO Diverting Bridge Z9645/…

    Optimum cooling through the use of the HASCO diverting bridge Z9645/…
  • 15/10/2011
    HASCO Cylinder Z2371/…, Z2380/…

    New HASCO cylinders for optimum control of mould plate assemblie Z2371/..., Z2380/...

    Multi-cavity hot runner systems are being built into smaller spaces, with tighter cavity to cavity distances. With needle valve gated systems, the plunger surface area is frequently not large enough for the necessary forces to close the needles. For this reason, new service-friendly cylinders for operating larger mould plate assemblies have now been developed. They are operated either pneumatically or hydraulically.
  • 12/10/2011
    New high-temperature cooling system

    The new HT series permits durable higher temperature stability

    Engineering plastics and new high-tech plastics require high mould temperatures for optimum processing by injection moulding.Conventional temperature control systems with conventional Viton seals cannot withstand such conditions over the long term. The standard seals become hard, brittle and begin to leak relatively quickly.

  • 27/09/2011
    "Meet the experts" – Exchange of information at the highest level

    Around 50 specialists from many different areas of mouldmaking and tooling design took up HASCO's invitation to attend its first "Meet the experts" at Schloss Hotel Holzrichter/Veserde. HASCO is a renowned manufacturer of standard mould units and a specialist for hot runner systems.

  • 23/08/2011
    HASCO – Innovations at FAKUMA in Friedrichshafen, Germany Hall/Booth A02 – 2202

    HASCO's Mould Base and Hot Runner divisions will present a variety of innovative solutions for mouldmaking and tooling design at the upcoming FAKUMA in Friedrichshafen. The Lüdenscheid/Germany-based company is specialised in the development and manufacture of standard mould units and hot runner systems for the plastics processing industry.

  • 27/07/2011
    Toolox 33, no compromises on form stability, machining and strength

    Why does HASCO recommend TOOLOX33 to its clients as a better alternative to the conventional materials 1.2311 and 1.2312? Toolox33 is a fully-hardened and tempered tool steel with a hardness of 29 HRC. Its unique structure is significantly better than that of established DIN steels and comparable specialised steels.