Sociální média

Být vždy dobře informováni!


 Facebook  Xing  LinkedIn  YouTube
Nákupní košík

Přihlaste se, abyste mohli používat tuto funkci.

Ještě nemáte žádné uživatelské konto?Registrujte se teď!

Průběh produktu

Přihlaste se, abyste mohli používat tuto funkci.

Ještě nemáte žádné uživatelské konto?Registrujte se teď!

text.skipToContent text.skipToNavigation

H34205/d1xl1

Tryska Techni Shot, Mono nozzle

Zvolení varianty výrobku

P l6 l4 l3 l2 d18 d17 d16 d15 d10 d6 d5 d4 d3 d2 d1 l1 Číslo výrobku
250 15 38 9,5 18 3 23 29,5 24 1,4 1 10 8 4,5 18 25 56 H34205/25x56
315 15 53 9,5 18 3 23 29,5 24 1,4 1 10 8 4,5 18 25 71 H34205/25x71
400 15 82 9,5 18 3 23 29,5 24 1,4 1 10 8 4,5 18 25 100 H34205/25x100
315 20 42 9,5 21 4 29 36 30 1,6 1,2 11 10 4,5 22 32 63 H34205/32x63
400 20 59 9,5 21 4 29 36 30 1,6 1,2 11 10 4,5 22 32 80 H34205/32x80
400 20 79 9,5 21 4 29 36 30 1,6 1,2 11 10 4,5 22 32 100 H34205/32x100
400 20 59 9,5 21 4 38 45 37 1,9 1,5 14 12 6 28 40 80 H34205/40x80
500 20 79 9,5 21 4 38 45 37 1,9 1,5 14 12 6 28 40 100 H34205/40x100
630 20 119 9,5 21 4 38 45 37 1,9 1,5 14 12 6 28 40 140 H34205/40x140
630 30 73 12 27 5 46 55 47 2,2 1,8 18 14 8 35 50 100 H34205/50x100

The Techni Shot nozzles are particularly suitable for demanding processing applications in the field of technical high performance polymers, and are preferably used in injection moulds in conjunction with hot runners H4000/..., H4010/.../S etc.

The Techni Shot-series is perfectly suitable for processing highly reinforced flame and retardant technical polymers

Special Features

  • Cavity centre-to-centre distance min. 18mm
  • There is a choice of 6 nozzle sizes ranging from 20 to 60mm nozzle head diameters and melt channel diameters from 3,5 to 13mm
  • The nozzles are available in lengths of 50 to 300mm
  • All nozzles have a modular design, nozzle-tips, heaters and thermocouples can easily be replaced
  • High resistance against abrasive wear
  • Homogeneous temperature profile
  • High compressive strength, also at temperatures over 300°C
  • A large range of different tip-geometries and materials allows an optimal stall point quality and an ideal heat conduction into the gate