K2501/100x130xs1 | Afrivertype | Kæbeform | Kæbeforme | K | Product catalogue | HASCO Portal

Dette website benytter cookies til forbedring og analyse af website samt forbedring af online tilbud. I
Privatlivserklæringen finder du yderligere information og muligheder for deaktivering af disse cookies. Med klik på
OK knappen erklærer du dig indforstået med benyttelsen.

OK
Produkter
Produkter
K-Standard
P-Standard
Z-Standard
Varmkanal
Kontakt
Lav en aftale
Sociale medier
Indkøbskurv

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

Produktflow

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

text.skipToContent text.skipToNavigation

K2501/100x130xs1

Kæbeform, Afriverversion

Udvalg af produktvarianter

Pos14 Pos13 Pos12 Pos11 Pos9 t1 s2 b1 l1 s1 Bestillingsbetegnelse
Z31/5x30 Z31/6x20 Z1000W/46/9 Z1000W/46/10 Z010/14x67 14 46 100 130 16 K2501/100x130x16
Z31/5x25 Z31/6x20 Z1000W/46/9 Z1000W/46/10 Z010/14x67 18 46 100 130 20 K2501/100x130x20
Z31/5x25 Z31/6x25 Z1000W/56/9 Z1000W/56/10 Z010/14x75 23 56 100 130 25 K2501/100x130x25
Z31/5x30 Z31/6x25 Z1000W/56/9 Z1000W/56/10 Z010/14x75 30 56 100 130 32 K2501/100x130x32
Z31/5x30 Z31/6x35 Z1000W/66/9 Z1000W/66/10 Z010/14x75 38 66 100 130 40 K2501/100x130x40

Features

  • To suit moulding geometry, the designer has the choice between Ejector type K 2500/... and the Stripper type K 2201/... 
  • K 2500/... as well as K 2501/... are available in 8 sizes with 5 split heights each.
  • Splits (K 2528/...) and core retainer insert (K 2531/...) are not supplied. 
  • Construction elements and angle pins actuation are positioned within the mould.
  • Regrindable split guides.
  • Interchangeable wear plates. 
  • Splits (K 2528/...) can be fully utilized for cavity contour and cooling.
  • Split length is equal to mould width.
  • Parallel slot in K 2528/... (Mat. 1.2767/ 1.2343 ESU) with dimensions re-ground according to hardness.
  • Distortion on hardening of splits does not affect the guiding system. 
  • Length of core retainer insert (K 2531/...) is equal to mould width.
  • Easy readjustment of dovetailed guide strips.
  • No tilting of split guide due to favourable length/width ratio.
  • Splits are secured by integrated spring plungers.
  • Undisturbed drop of mouldings.
  • Guide strips and guide bushings are offered in selflubricating design.