K2500/156x156xs1 | Udstødertype | Kæbeform | Kæbeforme | K | Product catalogue | HASCO Portal

Dette website benytter cookies til forbedring og analyse af website samt forbedring af online tilbud. I
Privatlivserklæringen finder du yderligere information og muligheder for deaktivering af disse cookies. Med klik på
OK knappen erklærer du dig indforstået med benyttelsen.

OK
Sociale medier
Indkøbskurv

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

Produktflow

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

text.skipToContent text.skipToNavigation

K2500/156x156xs1

Kæbeform, udstøderversion

Udvalg af produktvarianter

Pos12 Pos11 Pos10 Pos9 Pos8 t1 s2 b1 l1 s1 Bestillingsbetegnelse CAD-data
Z31/6x30 Z31/8x18 Z04/46x14x65 Z04/46x15x65 Z010/16x90 18 46 156 156 20 K2500/156x156x20
Z31/6x30 Z31/8x30 Z04/56x14x75 Z04/56x15x75 Z010/16x90 23 56 156 156 25 K2500/156x156x25
Z31/6x30 Z31/8x30 Z04/66x14x65 Z04/66x15x65 Z010/16x100 30 66 156 156 32 K2500/156x156x32
Z31/6x35 Z31/8x40 Z04/76x14x55 Z04/76x15x55 Z010/16x100 38 76 156 156 40 K2500/156x156x40
Z31/6x35 Z31/8x50 Z04/86x14x55 Z04/86x15x55 Z010/16x100 48 86 156 156 50 K2500/156x156x50

The dimensions of K2500/... are compatible with the HASCO K programme.

Special Features

  • To suit moulding geometry, the designer has the choice between Ejector type K2500/... and the Stripper type K2201/...
  • K2500/... as well as K2501/... are available in 8 sizes with 5 split heights each.
  • Splits (K2528/…) and core retainer insert (K2531/…) are not supplied.
  • Construction elements and angle pins actuation are positioned within the mould.
  • Regrindable split guides.
  • Interchangeable wear plates.
  • Splits (K2528/...) can be fully utilized for cavity contour and cooling.
  • Split length is equal to mould width.
  • Parallel slot in K2528/… (Mat. 1.2767/1.2343 ESU) with dimensions re-ground according to hardness.
  • Distortion on hardening of splits does not affect the guiding system.
  • Length of core retainer insert (K2531/...) is equal to mould width.
  • Easy readjustment of dovetailed guide strips.
  • No tilting of split guide due to favourable length/width ratio.
  • Splits are secured by integrated spring plungers.
  • Undisturbed drop of mouldings.
  • Guide strips and guide bushings are offered in selflubricating design.