Sociale medier
Indkøbskurv

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

Produktflow

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

text.skipToContent text.skipToNavigation

K2500/246x246xs1

Kæbeform, udstøderversion

Udvalg af produktvarianter

Pos12 Pos11 Pos10 Pos9 Pos8 t1 s2 b1 l1 s1 Bestillingsbetegnelse CAD-data
Z31/6x50 Z31/10x20 Z04/66x22x155 Z04/66x24x155 Z010/20x150 30 66 246 246 32 K2500/246x246x32
Z31/6x50 Z31/10x30 Z04/76x22x115 Z04/76x24x115 Z010/20x150 38 76 246 246 40 K2500/246x246x40
Z31/6x55 Z31/10x20 Z04/76x22x115 Z04/76x24x115 Z010/20x160 48 76 246 246 50 K2500/246x246x50
Z31/6x60 Z31/10x60 Z04/116x22x115 Z04/116x24x115 Z010/20x160 61 116 246 246 63 K2500/246x246x63
Z31/6x60 Z31/10x80 Z04/136x22x135 Z04/136x24x135 Z010/20x160 78 136 246 246 80 K2500/246x246x80

Special  Features

  • To suit moulding geometry, the designer has the choice between Ejector type K 2500 /... and the Stripper type K 2201/...
  • K 2500 /... as well as K 2501/... are available in 8 sizes with 5 split heights each
  • Splits (K 2528 /…) and core retainer insert (K 2531 /…) are not supplied 
  • Construction elements and angle pins actuation are positioned within the mould
  • Regrindable split guides
  • Interchangeable wear plates 
  • Splits (K 2528 /...) can be fully utilized for cavity contour and cooling
  • Split length is equal to mould width
  • Parallel slot in K 2528 /… (Mat. 1.2767) with dimensions re-ground according to hardness 
  • Distortion on hardening of splits does not affect the guiding system 
  • Length of core retainer insert (K 2531/...) is equal to mould width
  • Easy readjustment of dovetailed guide strips
  • No tilting of split guide due to favourable length/width ratio
  • Splits are secured by integrated spring plungers
  • Undisturbed drop of mouldings
  • Guide strips and guide bushings are offered in selflubricating design