Sociale medier
Indkøbskurv

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

Produktflow

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

text.skipToContent text.skipToNavigation

Z1780/d1xmax.l1xmax.H1xl2

Round latch unit, pulling system

Udvalg af produktvarianter

min.H1 r1 k2 s4 s3 l5 l4 l3 min.l1 d7 d6 d4 d3 d2 d1 max.l1 max.H1 l2 Bestillingsbetegnelse CAD-data
5 1 6 4 4,5 9 12 28 48 32 22 42 36 32 28 64 16 96
Z1780/28x64x16x96
5 1 6 4 4,5 9 12 28 64 32 22 42 36 32 28 80 32 96
Z1780/28x80x32x96
5 1 6 4 4,5 9 12 28 80 32 22 42 36 32 28 96 48 96
Z1780/28x96x48x96
5,5 1,5 8 5 4,5 9 15 36 60 42 29 54 46 39 36 84 24 116
Z1780/36x84x24x116
5,5 1,5 8 5 4,5 9 15 36 84 42 29 54 46 39 36 108 48 116
Z1780/36x108x48x116
5,5 1,5 8 5 4,5 9 15 36 108 42 29 54 46 39 36 132 72 116
Z1780/36x132x72x116
5,5 1,5 8 5 4,5 9 15 36 132 42 29 54 46 39 36 156 96 116
Z1780/36x156x96x116
6,5 2 10 6 5,5 11 19 45 76,5 56 40 74 63 52 48 106,5 30 136
Z1780/48x106,5x30x136
6,5 2 10 6 5,5 11 19 45 106,5 56 40 74 63 52 48 136,5 60 136
Z1780/48x136,5x60x136
6,5 2 10 6 5,5 11 19 45 136,5 56 40 74 63 52 48 166,5 90 136
Z1780/48x166,5x90x136

The HASCO round latch locking units Z1780/... and Z1782/... have been specially developed for the use in injection moulds and diecasting moulds where a second parting plane is

required in the mould.

Special Features

  • Flexible installation options
  • Optimum flow of forces through central multipoint locking
  • Offsets misalignment due to thermal expansion
  • Suitable for fast runners
  • Can be used as a pulling or pushing system
  • Low-wear stroke guiding due to free gap principle
  • Integrated collision protection
  • Construction inside the mould
  • High security during transport, production and storage
  • Compact design