Z4871/d1 | Datostempel | Markeringselementer | Generelle formkomponenter | Z | Product catalogue | HASCO Portal
Klik for at åbne / lukke Klik for at åbne / lukke
Produkter
Produkter
K-Standard
P-Standard
Z-Standard
Varmkanal
Kontakt
Lav en aftale
Sociale medier
Indkøbskurv

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

Produktflow

Log venligst ind for at kunne bruge denne funktion.

Du har endnu ikke en brugerkonto?Tilmeld dig nu!

text.skipToContent text.skipToNavigation

Z4871/d1

Marking stamp, blanc with arrow insert

Z4871/d1

58 HRC
1.4112

Log ind
Registrer

Udvalg af produktvarianter

Pos2 t1 l1 d4 d2 d1 Bestillingsbetegnelse CAD-data
Z48719/2,6 0,18 4 M0,8x0,2 1,4 2,6 Z4871/2,6
Z48719/3 0,18 4 M0,8x0,2 1,5 3 Z4871/3
Z48719/4 0,22 5 M1,1x0,25 2,1 4 Z4871/4
Z48719/5 0,3 8 M1,6x0,2 3,1 5 Z4871/5
Z48719/6 0,3 8 M1,6x0,2 3,1 6 Z4871/6
Z48719/8 0,45 10 M2,3x0,25 4,4 8 Z4871/8
Z48719/10 0,45 12 M2,5x0,35 5,2 10 Z4871/10
Z48719/12 0,45 14 M3x0,35 6,2 12 Z4871/12

With the new blank HASCO marking inserts, mould marking can be configured at will.

Special Features

  • For the smallest of installation spaces with diameters as of 2.6 mm and a length of 4 mm
  • Blank outer ring for individual marking
  • In stainless material 1.4112
  • Simple installation, setting and replacement of the arrow inserts from the parting plane
  • Rapid setting with a screwdriver
  • Low-wear mechanics
  • Long version Z4870/... screwed on from the rear
  • Short version Z4871/... pressed in from the parting plane
  • Compatible with marking insert series Z48700/... and Z48715/...