K2500/156x196xs1

Molde de correderas, Version paquete expulsion

K2500/156x196xs1

más

Selección de variante de producto

Pos12	Pos11	Pos10	Pos9	Pos8	t1	s2	b1	l1	s1	Número de producto
Z31/6x40	Z31/8x25	Z04/56x14x95	Z04/56x15x95	Z010/16x118	18	56	156	196	20	K2500/156x196x20
Z31/6x40	Z31/8x25	Z04/56x14x95	Z04/56x15x95	Z010/16x118	23	56	156	196	25	K2500/156x196x25
Z31/6x40	Z31/8x25	Z04/66x14x95	Z04/66x15x95	Z010/16x132	30	66	156	196	32	K2500/156x196x32
Z31/6x40	Z31/8x35	Z04/76x14x95	Z04/76x15x95	Z010/16x132	38	76	156	196	40	K2500/156x196x40
Z31/6x45	Z31/8x45	Z04/86x14x95	Z04/86x15x95	Z010/16x132	48	86	156	196	50	K2500/156x196x50

Features

To suit moulding geometry, the designer has the choice between Ejector type K 2500 /... and the Stripper type K 2201/...
K 2500 /... as well as K 2501/... are available in 8 sizes with 5 split heights each
Splits (K 2528 /…) and core retainer insert (K 2531 /…) are not supplied
Construction elements and angle pins actuation are positioned within the mould
Regrindable split guides
Interchangeable wear plates
Splits (K 2528 /...) can be fully utilized for cavity contour and cooling
Split length is equal to mould width.Parallel slot in K 2528 /… (Mat. 1.2767/ 1.2343 ESU) with dimensions re-ground according to hardness
Distortion on hardening of splits does not affect the guiding system
Length of core retainer insert (K 2531/...) is equal to mould width
Easy readjustment of dovetailed guide strips
No tilting of split guide due to favourable length /width ratio
Splits are secured by integrated spring plungers. Undisturbed drop of mouldings
Guide strips and guide bushings are offered in selflubricating design