K2500/296x296xs1

Molde de correderas, Version paquete expulsion

K2500/296x296xs1

más

Selección de variante de producto

Pos12	Pos11	Pos10	Pos9	Pos8	t1	s2	b1	l1	s1	Número de producto
Z31/6x55	Z31/10x35	Z04/76x22x145	Z04/76x24x145	Z010/20x170	30	66	296	296	40	K2500/296x296x40
Z31/6x60	Z31/10x35	Z04/76x22x145	Z04/76x24x145	Z010/20x170	38	76	296	296	50	K2500/296x296x50
Z31/6x55	Z31/10x55	Z04/116x22x115	Z04/116x24x115	Z010/20x190	48	86	296	296	63	K2500/296x296x63
Z31/6x60	Z31/10x75	Z04/136x22x135	Z04/136x24x135	Z010/20x190	61	116	296	296	80	K2500/296x296x80
Z31/6x65	Z31/10x80	Z04/156x22x155	Z04/156x24x155	Z010/20x210	78	136	296	296	100	K2500/296x296x100

The dimensions of K2500/... are compatible with the HASCO K programme.

Features

To suit moulding geometry, the designer has the choice between Ejector type K 2500 /... and the Stripper type K 2201/...
K 2500 /... as well as K 2501/... are available in 8 sizes with 5 split heights each
Splits (K 2528 /...) and core retainer insert (K 2531 /...) are not supplied
Construction elements and angle pins actuation are positioned within the mould
Regrindable split guides
Interchangeable wear plates
Splits (K 2528 /...) can be fully utilized for cavity contour and cooling
Split length is equal to mould width
Parallel slot in K 2528 /... (Mat. 1.2767/ 1.2343 ESU) with dimensions re-ground according to hardness.
Distortion on hardening of splits does not affect the guiding system
Length of core retainer insert (K 2531/...) is equal to mould width
Easy readjustment of dovetailed guide strips
No tilting of split guide due to favourable length/width ratio
Splits are secured by integrated spring plungers
Undisturbed drop of mouldings
Guide strips and guide bushings are offered in selflubricating design