Z1420/Typ

Rajakytkin, mechanical

Z1420/Typ

Tuotteen tietosivu Katalogisivu Kiinnitysohjeet Mediakirjasto

lisää

Hinnat ja ostoskori tulevat näkyville kirjauduttuasi sisään.

Valitse tästä

Typ	Tuotenumero	CAD-data
1	Z1420/1

The mechanical HASCO limit switch Z 1420 /... is used in injection moulding tools to monitor the exact position of the ejector assemblies.

There are also various ways in which it can be used in the construction of tools and appliances where the exact end positions must be detected (e.g. moved cores, stripper plates).

The switching distance can be set up using an Allen key.

One quarter turn changes the switching point by approximately 0.15 mm.

Special Features

Movement sequences detect the exact end position
Avoids damage to tools
Operation height can be specified (3 - 5 mm)
Extremely flat design
Adapted to Z 55 /... support discs
Includes 1 mm spacer to set the height
Moisture-proof in accordance with IP 41
Can be adjusted on the machine
Maximum operational temperature + 80 °C

Kategorian kaikki tuotteet - Rajakytkin

Z1420/...

Rajakytkin, mechanical

Z1420/Typ

Rajakytkin, mechanical

Oma HASCOni

© 2021 HASCO

Aina hyvin ajan tasalla.