K2500/196x196xs1

Forma szczękowa, Ejector type

K2500/196x196xs1

wiecej

Ceny oraz koszyk są widoczne po zalogowaniu.

Wybór wariantów produktów

Pos12	Pos11	Pos10	Pos9	Pos8	t1	s2	b1	l1	s1	Numer produktu
Z31/6x40	Z31/10x25	Z04/66x18x95	Z04/66x20x95	Z010/18x125	23	66	196	196	25	K2500/196x196x25
Z31/6x40	Z31/10x25	Z04/66x18x95	Z04/66x20x95	Z010/18x125	30	66	196	196	32	K2500/196x196x32
Z31/6x40	Z31/10x35	Z04/76x18x95	Z04/76x20x95	Z010/18x125	38	76	196	196	40	K2500/196x196x40
Z31/6x50	Z31/10x30	Z04/86x18x95	Z04/86x20x95	Z010/18x140	48	86	196	196	50	K2500/196x196x50
Z31/6x45	Z31/10x60	Z04/116x18x115	Z04/116x20x115	Z010/18x140	61	116	196	196	63	K2500/196x196x63

Features

To suit moulding geometry, the designer has the choice between Ejector type K 2500/... and the Stripper type K 2201/...
K 2500/... as well as K 2501/... are available in 8 sizes with 5 split heights each.
Splits (K 2528/...) and core retainer insert (K 2531/...) are not supplied.
Construction elements and angle pins actuation are positioned within the mould.
Regrindable split guides.
Interchangeable wear plates.
Splits (K 2528/...) can be fully utilized for cavity contour and cooling.
Split length is equal to mould width.
Parallel slot in K 2528/... (Mat. 1.2767/ 1.2343 ESU) with dimensions re-ground according to hardness.
Distortion on hardening of splits does not affect the guiding system.
Length of core retainer insert (K 2531/... ) is equal to mould width.
Easy readjustment of dovetailed guide strips.
No tilting of split guide due to favourable length /width ratio.
Splits are secured by integrated spring plungers.
Undisturbed drop of mouldings.
Guide strips and guide bushings are offered in selflubricating design.