H3309/d1xl1 | Šoba | Techni Shot | Toplokanalna šoba | H | Katalog izdelkov | HASCO Portal

Ta spletna stran uporablja piškotke za izboljšanje in analizo spletne strani ter za izboljšanje spletne ponudbe. V
izjavi o varstvu podatkov lahko najdete več informacij in možnosti za onemogočenje teh piškotkov. S klikom na
gumb V redu potrdite, da soglašate z uporabo.

OK
Družbeni mediji

Vedno dobro obveščeni!


 Facebook  Xing  LinkedIn  YouTube
Košarica

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

Zgodovina izdelka

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

text.skipToContent text.skipToNavigation

H3309/d1xl1

Distančna puša, za H3307 in H3308

Izbira različice izdelka

d6 d4 d1 l1 Naročniška oznaka Podatki CAD
27 16 20 15 H3309/20x15
27 16 20 45 H3309/20x45
34 21,5 25 16 H3309/25x16
34 21,5 25 31 H3309/25x31
34 21,5 25 60 H3309/25x60
40 26 32 15 H3309/32x15
40 26 32 32 H3309/32x32
40 26 32 52 H3309/32x52
48 32,5 40 32 H3309/40x32
48 32,5 40 64 H3309/40x64

The Techni Shot nozzles are particularly suitable for demanding processing applications in the field of technical high performance polymers, and are preferably used in injection moulds in conjunction with hot runners H4000/..., H4010/.../S etc. 

The Techni Shot-series is perfectly suitable for processing highly reinforced flame and retardant technical polymers.

Special Features

  • Cavity centre-to-centre distance min. 18mm 
  • There is a choice of 6 nozzle sizes ranging from 20 to 60mm nozzle head diameters and melt channel diameters from 3,5 to 13mm 
  • The nozzles are available in lengths of 50 to 300mm 
  • All nozzles have a modular design, nozzle-tips, heaters and thermocouples can easily be replaced 
  • High resistance against abrasive wear 
  • Homogeneous temperature profile
  • High compressive strength, also at temperatures over 300°C 
  • A large range of different tipgeometries and materials allows an optimal stall point quality and an ideal heat conduction into the gate