K2500/246x296xs1 | Izmetalna izvedba | Orodje z drsniki | Sklopi | K | Katalog izdelkov | HASCO Portal

Ta spletna stran uporablja piškotke za izboljšanje in analizo spletne strani ter za izboljšanje spletne ponudbe. V
izjavi o varstvu podatkov lahko najdete več informacij in možnosti za onemogočenje teh piškotkov. S klikom na
gumb V redu potrdite, da soglašate z uporabo.

OK
Izdelki
Izdelki
K-standardi
P-standardi
Z-standardi
Vroči kanal
Kontakt
Dogovor za sestanek
Družbeni mediji

Vedno dobro obveščeni!


 Facebook  Xing  LinkedIn  YouTube
Košarica

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

Zgodovina izdelka

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

text.skipToContent text.skipToNavigation

K2500/246x296xs1

Orodje z drsniki, izmetalna izvedba

K2500/246x296xs1

Izbira različice izdelka

Pos12 Pos11 Pos10 Pos9 Pos8 t1 s2 b1 l1 s1 Naročniška oznaka Podatki CAD
Z31/6x55 Z31/10x25 Z04/66x22x155 Z04/66x24x155 Z010/20x170 30 66 246 296 32 K2500/246x296x32
Z31/6x55 Z31/10x35 Z04/76x22x145 Z04/76x24x145 Z010/20x170 38 76 246 296 40 K2500/246x296x40
Z31/6x60 Z31/10x45 Z04/86x22x135 Z04/86x24x135 Z010/20x170 48 86 246 296 50 K2500/246x296x50
Z31/6x55 Z31/10x55 Z04/116x22x155 Z04/116x24x155 Z010/20x190 61 116 246 296 63 K2500/246x296x63
Z31/6x65 Z31/10x75 Z04/136x22x135 Z04/136x24x135 Z010/20x190 78 136 246 296 80 K2500/246x296x80

The dimensions of K2500/... are compatible with the HASCO K programme.

Special Features

  • To suit moulding geometry, the designer has the choice between Ejector type K2500/... and the Stripper type K2201/...
  • K2500/... as well as K2501/... are available in 8 sizes with 5 split heights each.
  • Splits (K2528/…) and core retainer insert (K2531/…) are not supplied.
  • Construction elements and angle pins actuation are positioned within the mould.
  • Regrindable split guides.
  • Interchangeable wear plates.
  • Splits (K2528/...) can be fully utilized for cavity contour and cooling.
  • Split length is equal to mould width.
  • Parallel slot in K2528/… (Mat. 1.2767/1.2343 ESU) with dimensions re-ground according to hardness.
  • Distortion on hardening of splits does not affect the guiding system.
  • Length of core retainer insert (K2531/...) is equal to mould width.
  • Easy readjustment of dovetailed guide strips.
  • No tilting of split guide due to favourable length/width ratio.
  • Splits are secured by integrated spring plungers.
  • Undisturbed drop of mouldings.
  • Guide strips and guide bushings are offered in selflubricating design.