K2501/100x130xs1 | Snemalna izvedba | Orodje z drsniki | Sklopi | K | Katalog izdelkov | HASCO Portal
Kliknite za odpiranje / zapiranje Kliknite za odpiranje / zapiranje
Izdelki
Izdelki
K-standardi
P-standardi
Z-standardi
Vroči kanal
Kontakt
Dogovor za sestanek
Družbeni mediji

Vedno dobro obveščeni!


 Facebook  Xing  LinkedIn  YouTube
Košarica

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

Zgodovina izdelka

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

text.skipToContent text.skipToNavigation

K2501/100x130xs1

Orodje z drsniki, snemalna izvedba

Izbira različice izdelka

Pos14 Pos13 Pos12 Pos11 Pos9 t1 s2 b1 l1 s1 Naročniška oznaka Podatki CAD
Z31/5x30 Z31/6x20 Z1000W/46/9 Z1000W/46/10 Z010/14x67 14 46 100 130 16 K2501/100x130x16
Z31/5x25 Z31/6x20 Z1000W/46/9 Z1000W/46/10 Z010/14x67 18 46 100 130 20 K2501/100x130x20
Z31/5x25 Z31/6x25 Z1000W/56/9 Z1000W/56/10 Z010/14x75 23 56 100 130 25 K2501/100x130x25
Z31/5x30 Z31/6x25 Z1000W/56/9 Z1000W/56/10 Z010/14x75 30 56 100 130 32 K2501/100x130x32
Z31/5x30 Z31/6x35 Z1000W/66/9 Z1000W/66/10 Z010/14x75 38 66 100 130 40 K2501/100x130x40

Features

  • To suit moulding geometry, the designer has the choice between Ejector type K 2500/... and the Stripper type K 2201/... 
  • K 2500/... as well as K 2501/... are available in 8 sizes with 5 split heights each.
  • Splits (K 2528/...) and core retainer insert (K 2531/...) are not supplied. 
  • Construction elements and angle pins actuation are positioned within the mould.
  • Regrindable split guides.
  • Interchangeable wear plates. 
  • Splits (K 2528/...) can be fully utilized for cavity contour and cooling.
  • Split length is equal to mould width.
  • Parallel slot in K 2528/... (Mat. 1.2767/ 1.2343 ESU) with dimensions re-ground according to hardness.
  • Distortion on hardening of splits does not affect the guiding system. 
  • Length of core retainer insert (K 2531/...) is equal to mould width.
  • Easy readjustment of dovetailed guide strips.
  • No tilting of split guide due to favourable length/width ratio.
  • Splits are secured by integrated spring plungers.
  • Undisturbed drop of mouldings.
  • Guide strips and guide bushings are offered in selflubricating design.