K2501/156x156xs1 | Snemalna izvedba | Orodje z drsniki | Sklopi | K | Katalog izdelkov | HASCO Portal

Ta spletna stran uporablja piškotke za izboljšanje in analizo spletne strani ter za izboljšanje spletne ponudbe. V
izjavi o varstvu podatkov lahko najdete več informacij in možnosti za onemogočenje teh piškotkov. S klikom na
gumb V redu potrdite, da soglašate z uporabo.

OK
Izdelki
Izdelki
K-standardi
P-standardi
Z-standardi
Vroči kanal
Kontakt
Dogovor za sestanek
Družbeni mediji

Vedno dobro obveščeni!


 Facebook  Xing  LinkedIn  YouTube
Košarica

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

Zgodovina izdelka

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

text.skipToContent text.skipToNavigation

K2501/156x156xs1

Orodje z drsniki, Snemalna izvedba

Izbira različice izdelka

Pos14 Pos13 Pos12 Pos11 Pos9 t1 s2 b1 l1 s1 Naročniška oznaka Podatki CAD
Z31/6x30 Z31/8x18 Z1000W/46/14 Z1000W/46/15 Z010/16x90 18 46 156 156 20 K2501/156x156x20
Z31/6x30 Z31/8x30 Z1000W/56/14 Z1000W/56/15 Z010/16x90 23 56 156 156 25 K2501/156x156x25
Z31/6x30 Z31/8x30 Z1000W/66/14 Z1000W/66/15 Z010/16x100 30 66 156 156 32 K2501/156x156x32
Z31/6x35 Z31/8x40 Z1000W/76/14 Z1000W/76/15 Z010/16x100 38 76 156 156 40 K2501/156x156x40
Z31/6x35 Z31/8x50 Z1000W/86/14 Z1000W/86/15 Z010/16x100 48 86 156 156 50 K2501/156x156x50

Features

  • To suit moulding geometry, the designer has the choice between Ejector type K 2500 /... and the Stripper type K 2201/... 
  • K 2500 /... as well as K 2501/... are available in 8 sizes with 5 split heights each
  • Splits (K 2528 /...) and core retainer insert (K 2531 /...) are not supplied
  • Construction elements and angle pins actuation are positioned within the mould
  • Regrindable split guides
  • Interchangeable wear plates
  • Splits (K 2528 /...) can be fully utilized for cavity contour and cooling
  • Split length is equal to mould width
  • Parallel slot in K 2528 /... (Mat. 1.2767/ 1.2343 ESU) with dimensions re-ground according to hardness.
  • Distortion on hardening of splits does not affect the guiding system 
  • Length of core retainer insert (K 2531/...) is equal to mould width
  • Easy readjustment of dovetailed guide strips
  • No tilting of split guide due to favourable length/width ratio
  • Splits are secured by integrated spring plungers
  • Undisturbed drop of mouldings
  • Guide strips and guide bushings are offered in selflubricating design