HASCO Portal

Ta spletna stran uporablja piškotke za izboljšanje in analizo spletne strani ter za izboljšanje spletne ponudbe. V
izjavi o varstvu podatkov lahko najdete več informacij in možnosti za onemogočenje teh piškotkov. S klikom na
gumb V redu potrdite, da soglašate z uporabo.

OK
Družbeni mediji

Vedno dobro obveščeni!


 Facebook  Xing  LinkedIn  YouTube
Košarica

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

Zgodovina izdelka

Prijavite se, da boste lahko uporabljali to funkcijo.

Ali še nimate uporabniškega računa?Registrirajte se zdaj!

text.skipToContent text.skipToNavigation
maj 2019

HASCO's hose range significantly extended PFA hoses for high temperatures

HASCO offers a wide range of different hoses specifically for demanding applications in injection moulding tools.

The new, highly flexible, multi-layer HASCO PFA high-temperature hose Z8560/... made of perfluoroalkoxy copolymer (PFA) is protected by a hard silicone sheathing. The fluoroplastic has outstanding resistance to virtually all chemicals and can be used for mould temperature control with media such as water, steam, oil and air.


With the highly flexible, twist-free and kink-resistant high-temperature hoses, minimal bending radii can be achieved. The hoses are available in blue and red to allow unmistakable identification of the heating/cooling lines.


The ready-made PFA high-temperature hoses, in versions with 9 mm diameter (M14x1.4 and G1/4 connection) and 13 mm diameter (M16x1.4 and G3/8 connection), are designed for operating pressures of up to 60/65 bar and media temperatures up to +200 °C. In addition to the standard lengths of 300 to 2,500 mm, other customised lengths are also available on request.

Press release