K3501/b1xl1xs1/Mat

Insats, with changing ejector

K3501/b1xl1xs1/Mat

mer

Logga in

Val av produkt/utförande

t1	a8	a7	a6	a5	a4	a3	a2	a1	b2	l3	l2	d2	d1	b1	l1	s1	Mat	Produkt
6,9	31	31,5	25,5	32,5	31	61	104	124	48	91	108	11	M8	80	140	25	1.2767	K3501/80x140x25/1.2767
6,9	31	31,5	25,5	32,5	31	61	104	124	48	91	108	11	M8	80	140	25	3.4365	K3501/80x140x25/3.4365
13,9	31	31,5	25,5	32,5	31	61	104	124	48	91	108	11	M8	80	140	32	1.2767	K3501/80x140x32/1.2767
13,9	31	31,5	25,5	32,5	31	61	104	124	48	91	108	11	M8	80	140	32	3.4365	K3501/80x140x32/3.4365
21,9	31	31,5	25,5	32,5	31	61	104	124	48	91	108	11	M8	80	140	40	1.2767	K3501/80x140x40/1.2767
21,9	31	31,5	25,5	32,5	31	61	104	124	48	91	108	11	M8	80	140	40	3.4365	K3501/80x140x40/3.4365

The HASCO K 3500 /... quick-change Mould System has been especially developed for the economic production of samples, prototypes and small series.

It consists of the mould changing unit K 3500 /... and the matching mould inserts K 3501/... and K 3520 /....

The inserts are exchangeable according to the HASCO modular system.

Special Features

The inserts are bolted through from the parting plane and can be exchanged in the injection moulding machine.
Minimum downtimes due to fast changing of the mould inserts.
Mould plates can be obtained in materials 1.2312 and 1.2085.
3 mould sizes, compatible with the K-range
- 156 x 196
- 246 x 296
- 296 x 396
The inserts with integrated cooling lines can be obtained in materials 1.2767 and 3.4365.
Connection between mould insert
K 3501 and mould-changing unit
K 3500 is by means of a locking bar.