Z457/d1xd2xl1 | Ejector sleeve | Ejector | Ejection | Z | Product catalogue | HASCO模具标准

本网站使用 Cookie,以便于对网站进行改善和分析以及改善在线内容。在
数据保护声明中您将找到用于禁用这些 Cookie 的更多信息和选项。点击
OK 按钮即代表您同意使用。

OK
Products
Products
K-Standards
P-Standards
Z-Standards
Hot runner
联系方式
预约
社交媒体

总会及时通知您!


 Facebook  Xing  LinkedIn  YouTube
购物篮

请登录,以便能使用此项功能。

您还没有用户帐户?请现在就注册!

产品历史

请登录,以便能使用此项功能。

您还没有用户帐户?请现在就注册!

text.skipToContent text.skipToNavigation

Z457/d1xd2xl1

頂出套筒, DLC

Z457/d1xd2xl1

WAS (~ 1.2343)
DIN ISO 8405 (DIN 16756)
DLC镀层处理

Prices and shopping cart visible after login.
注册

选择产品规格

r1 k1 l2 d4 d3 d1 d2 l1 产品 CAD data
0,5 3 35 2,3 7 3,5 2 71 Z457/3,5x2x71
0,5 3 35 2,3 7 3,5 2 80 Z457/3,5x2x80
0,5 3 35 2,3 7 3,5 2 90 Z457/3,5x2x90
0,5 3 35 2,3 7 3,5 2 100 Z457/3,5x2x100
0,5 3 35 2,3 7 3,5 2 112 Z457/3,5x2x112
0,5 3 35 2,3 7 3,5 2 125 Z457/3,5x2x125
0,5 3 35 2,3 7 3,5 2 140 Z457/3,5x2x140

The DLC coating combines good hardness with optimum tribological properties as regards friction, wear and lubrication. 

The high layer hardness and the low friction values of the coated ejector sleeves combined with the DLC coated ejector pins Z 400 /... significantly improve the service life of the moulds and thus make an important contri-bution to increasing the productivity of the moulds. 

Special Features 

  • Sleeves with an outer coating that have DLC coated ejectors pins Z 400 /... running inside them
  • Nitrided bore 
  • Production without lubrication 
  • No accumulation of grease at the end of the ejector 
  • Hard slip layer
  • Extremely low friction coefficient 
  • High ejector speeds possible 
  • Ideal for use in the food and medical sectors 
  • Suitable for clean-room use 
  • Reduction of wear on the mould insert